Opening the on-screen display via double keypress
As an alternative to opening the on-screen display (OSD) with the hotkey
key+Num
or
Double hotkey+Num
key twice.
How to enable/disable the activation of the on-screen display via double key-
press:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under
OSD via 2x keypress
Off
OSD cannot be opened via double keypress (default)
Ctrl
OSD is opened by pressing the Ctrl key twice
OSD is opened by pressing the Alt key twice
Alt
OSD is opened by pressing the Alt Gr key twice
Alt Gr
Win
OSD is opened by pressing the Windows key twice
Shift
OSD is opened by pressing the Shift key twice
OSD is opened by pressing the Print key twice
Print
OSD is opened by pressing the left key twice
Cursor left
Cursor right
OSD is opened by pressing the right key twice
Cursor down
OSD is opened by pressing the down key twice
OSD is opened by pressing the up key twice
Cursor up
5. Press
to save your settings.
F2
1. In the menu, click on
2. Click twice on the computer module (
3. In the
OSD via double keypress
options:
OSD cannot be opened via double keypress (default)
Off
Ctrl
OSD is opened by pressing the Ctrl key twice
Alt
OSD is opened by pressing the Alt key twice
OSD is opened by pressing the Alt Gr key twice
Alt Gr
OSD is opened by pressing the Windows key twice
Win
Shift
OSD is opened by pressing the Shift key twice
Print
OSD is opened by pressing the Print key twice
OSD is opened by pressing the left key twice
Cursor left
OSD is opened by pressing the right key twice
Cursor right
Cursor down
OSD is opened by pressing the down key twice
Cursor up
OSD is opened by pressing the up key twice
4. Click on
Save
.
you can also open the OSD by pressing a configured
(default) to open the on-screen display.
System setup
and press
Hotkey
and press
Enter
.
select one of the following options:
.
KVM extender
field, you can select between the following
Enter
.
CPU
) you want to configure.
G&D VisionXS-C-DP-UHR · 28
Configuration
Hot-