Configuration Settings; Using Single Or Double Hotkeys - G&D DVIMUX2-DL-PS/2 Installationanleitung Und Betriebsanleitung

Configuration settings

Using single or double hotkeys

If many application programs with key combinations are operated on one computer
or if different G&D devices are used in one cascade, the number of available key
combinations might be restricted.
In such a case, it is appropriate to apply double hotkeys.
How to enable single or double hotkeys:
1. Press
Hotkey+Backspace
the setup mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable the use of single or double
hotkeys:
 enables single hotkeys
S
A  disables double hotkeys
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the Switch mode of the service port is
enabled. Enter »
2. Use the Arrow
3. Press the Space
 enables single hotkeys
No
Yes  disables double hotkeys
4. Press the S key to save your settings.
Depending on your settings, the active hotkey is converted into a double hotkey (or
vice versa):
Single Hotkey
Ctrl
Alt
Alt Gr
Win
Shift
(default:
Ctrl+Backspace
« to switch to the setup menu.
#!
or Arrow keys to select the
key (repeatedly) to enable the use of single or double hotkeys:
Configuration
) simultaneously to enable
Double Hotkey entry.
Double Hotkey
Ctrl+Shift
Alt+Shift
Alt Gr+Ctrl
Win+Ctrl
Shift+Win
G&D DVIMUX2-DL-PS/2 · 16