Switching Between The Computers; Switching Via Buttons; Switching Via Key Combinations; Switching Via Keys F21 And F22 - G&D DVIMUX2-DL-PS/2 Installationanleitung Und Betriebsanleitung

Switching between the computers

The user can either use the two buttons on the front panel of the device or key com-
binations to switch between different computers.
Keyboard and mouse inputs are forwarded to the active computer. The video signal
of the active computer is displayed on the console monitor.

Switching via buttons

How to use the buttons on the device to switch to a certain channel:
 Press the button of the channel you wish to activate.

Switching via key combinations

How to use key combinations to switch to a specific channel:
 Press Hotkey+Select key
The default settings allow you to switch between channels by pressing
select keys to .
1 2
IMPORTANT: Switching between the channels takes place if the pressed key combi-
nation is released.
NOTE: If one of these key combinations interferes with a key combination of an
installed application program, the key combination of the KVM switch can be
adjusted (see page 17).

Switching via keys F21 and F22

IMPORTANT: Switching between the channels via
default settings of the KVM switch.
An alternative to switching channels with select keys is to use the
on your keyboard.
After enabling the switching of channels (see page 22), press
1 or to switch to channel 2 of the KVM switch.
F22
on the console keyboard.
Switching between the computers
and is deactivated in the
F21 F22
F21 and
F21 to switch to channel
G&D DVIMUX2-DL-PS/2 · 8
Ctrl and the
F22 keys