Enabling/Disabling the hotkey delay
Press the
Hotkey+Backspace
onds in order to start the setup mode in the default settings.
You can disable the hotkey delay if you want to start the setup mode immediately
after pressing the key combination.
How to enable/disable the hotkey delay:
1. Press
Hotkey+Backspace
the setup mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable/disable the hotkey delay:
7
enables hotkey delay
8
disables hotkey delay
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the Switch mode of the service port is
enabled. Enter »
2. Use the
Arrow
3. Press the
Space
Yes
enables hotkey delay
No
disables hotkey delay
4. Press the
S
key to save your settings.
(default:
Ctrl+Backspace
(default:
Ctrl+Backspace
« to switch to the setup menu.
#!
or
Arrow
keys to select the
key (repeatedly) to enable/disable the hotkey delay:
Configuration
) key combination for seven sec-
) simultaneously to enable
Hotkey Delay
entry.
G&D DVIMUX2-DL-PS/2 · 20