Switching Channels Via Keys F21 And F22 - G&D DVIMUX2-DL-PS/2 Installationanleitung Und Betriebsanleitung

Configuration

Switching channels via keys F21 and F22

IMPORTANT: Switching between the channels via
default settings of the KVM switch.
An alternative to switching channels with select keys (see page 19) is to use the
and F22 keys on your keyboard.
After enabling the switching of channels (see below), press
or to switch to channel 2 of the KVM switch.
F22
How to enable/disable switching channels via F21 and F22:
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the Switch mode of the service port is
enabled. Enter »
2. Use the Arrow
3. Press the
Space
 disables switching of channels by pressing F21 and F22
No
Yes  enables switching of channels by pressing F21 and F22
4. Press the S
25 · G&D DVIMUX2-DL-PS/2
#! « to switch to the setup menu.
or Arrow keys to select the
key (repeatedly) to choose between the following options:
key to save your settings.
and is deactivated in the
F21 F22
F21 to switch to channel 1
Select Channel via F21/F22
F21
entry.