Inhaltsverzeichnis
Werbung
ERGÄNZUNG
Seat belt warning
Follow this warning as well as the instruc-
tion for seat belt in this book.
WARNING
Seat belts are designed to bear upon
the bony structure of the body, and
should be worn low across the front
of the pelvis or the pelvis, chest and
shoulders, as applicable; wearing the
lap section of the belt across the
abdominal area must be avoided.
• Seat belts should be adjusted as
firmly as possible, consistent with
comfort, to provide the protection
for which they have been designed.
A slack belt will greatly reduce the
protection afforded to the wearer.
• Care should be taken to avoid con-
tamination of the webbing with pol-
ishes, oils and chemicals, and
particularly battery acid. Cleaning
may safely be carried out using
mild soap and water. The belt
should be replaced if webbing
becomes frayed, contaminated or
damaged.
12-3
(Continued)
• It is essential to replace the entire
assembly after it has been worn in
a severe impact even if damage to
the assembly is not obvious.
• Belts should not be worn with
straps twisted.
• Each belt assembly must only be
used by one occupant; it is danger-
ous to put a belt around a child
being carried on the occupant's
lap.
In the case where a "Seat Belt Assembly"
incorporates an "Automatic Length Adjust-
ing and Locking Retractor" or an "Emer-
gency Locking Retractor".
• No
modifications
should be made by the user which
will either prevent the seat belt
adjusting devices from operating to
remove slack, or prevent the seat
belt assembly from being adjusted
to remove slack.
(Continued)
• Referring
instruction in this book, adjust the
seat belt so that the lap and sash
portions of the Seat Belt Assembly
fit as firmly as possible consistent
with comfort.
WARNING
WARNING
or
additions
to
the
SEAT
BELT
For GCC countries
Technical data
1.2 L
Max power :
61 kW/6000 rpm
Max torque :
113 Nm/4200 rpm
Max speed :
170 km/h (2WD M/T)
160 km/h (2WD CVT)
Werbung
Kapitel
Inhaltsverzeichnis
