Operation - Bosch MSM8 Serie Gebrauchsanleitung

MSM8-Zubehör_de-ar.book Seite 12 Donnerstag, 12. Juni 2014 5:20 17
en
, Explanation of the symbols on the appliance or accessory
Caution! Rotating tools.
Do not place fingers in the feed tube.
Do not clean the lid of the multi-function accessory
in the dishwasher.
Never immerse the lid of the multifunction accessory
in liquids and do not wash under running water.
Before use, read these instructions carefully in
order to become familiar with important safety
and operating instructions for this appliance.
Please keep the operating instructions
in a safe place.
If passing on the appliance to a third party,
always include the operating instructions.
Universal cutter L
Please fold out the illustrated pages.
Fig.

1 Universal cutter L/XL
2 Blade
3 Attachment
4 Lid
5 Ice-crusher-blade (for size L only) *
*
For some models.
With the universal cutter XL use the appliance
at full power when preparing honey spread
(for the recipe, see separate Instructions
for Use for this accessory).
A universal cutter can be ordered from
customer service (order no. 753122).

Operation

The universal cutter is suitable for cutting meat,
hard cheese, onions, herbs, garlic, fruit,
vegetables, nuts, almonds.
Always observe the maximum quantities and
processing times in the table (Fig.=).
You can crush ice with the ice crusher blade.
Optimum processing quantity: 4–6 ice cubes.
12
The blade is sharp and
can cause injury!
Never grip the blade in the universal cutter.
Take hold of the universal cutter blade
by the plastic handle only.
Do not touch blade of the universal cutter
with bare hands. Clean them with a brush.
Warning!
The universal cutter must be completely
assembled before use!
Caution!
Before cutting meat, remove gristle, bones and
sinews.
The universal cutter is not suitable for cutting
very hard items (coffee beans, radishes,
nutmeg) and frozen food (fruit, etc.).
Fig.

Place the universal cutter on a smooth,

clean work surface and press.
Insert the blade.

Add food.

Warning!
Blade must sit straight in the universal cutter
so that the attachment sits correctly (Fig. =
Place the attachment on the universal

cutter and rotate in a clockwise direction
until it "clicks" into position.
Place the base unit on the attachment

and lock into position.
Insert the mains plug.

Hold the base unit and universal cutter

firmly and switch on the appliance
(turbo speed).
Release the On button after processing.

Robert Bosch Hausgeräte GmbH
-3).
