Basic Operation; Cable Length; Swivel Arm Positions; Opening Swivel Arm - Bosch 8 OptiMUM Serie Gebrauchsanleitung

7 Basic operation
ope r a t i o n
ope r a t i o n
7.1 Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
Pull the power cable out to the re-
1.
quired length.
To shorten the cable, push it into
2.
the cable storage compartment.
7.2 Swivel arm positions
You can find an overview of the posi-
tions of the swivel arm here.
Posi- Use
tion
Posi- Swivel arm is closed.
tion 1 ¡ Process ingredients with
tools.
¡ Use accessory on main
drive, e.g. Meat mincer.
¡ Use accessory on drive
2, e.g. Continuous feed
shredder
¡ Use accessory on drive
3, e.g. Glass blender at-
tachment
Posi- Swivel arm is open.
tion 2 ¡ Insert or remove bowl.
¡ Attach or remove lid.
¡ Insert or remove tool.
¡ Add the ingredients to
the bowl.
7.3 Opening swivel arm
▶ Press the release button and raise
the swivel arm until it engages.
→ Fig. 5
a The swivel arm is fixed in posi-
tion 2.
7.4 Closing swivel arm
Press the release button and push
▶
the swivel arm down until it en-
gages.
→ Fig. 6
a The swivel arm is fixed in posi-
tion 1.
7.5 Removing bowl
▶ Turn the bowl clockwise and re-
move.
→ Fig.
7
7.6 Inserting bowl
Place the bowl in the base unit.
1.
→ Fig. 8
Use the recesses on the base unit.
Turn the bowl anticlockwise until it
2.
engages.
→ Fig.
9
7.7 Attaching bowl lid
Requirement: No tool is used here.
Fit the lid onto the main drive until
▶
it engages.
→ Fig. 10
The filling shaft must face towards
the front.
7.8 Removing bowl lid
Requirement: No tool is used here.
Take the cover off the main drive.
▶
7.9 Inserting tools
Select the tool required.
1.
→ "Overview of tools", Page 31
Press the tool into the main drive
2.
until it engages.
→ Fig. 11
The protective cap
the main drive completely.
operation en
must cover
33