Safety Systems; Before Using For The First Time; Preparing The Appliance; Basic Operation - Bosch MUM-Serie 2 Gebrauchsanleitung

5.7 Safety systems
You can find an overview of your ap-
pliance's safety systems here.
Start lock-out
Start lock-out prevents your appli-
ance from being switched on acci-
dentally.
The appliance can only be switched
on and operated if the swivel arm
has engaged correctly in position 1
or position 3.
Restart lock-out
Restart lock-out prevents your appli-
ance from automatically restarting
processing after a power failure.
The appliance is switched on again
after a power failure. Processing can-
not start again until the rotary switch
has been set to
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
6 Before using for the
f i r s t t i m e
first time
Prepare the appliance for use.
f i r s t t i m e
6.1 Preparing the appliance
Press the release button and raise
1.
the swivel arm until it engages.
→ "Moving the swivel arm",
Page 31
Lift and remove the bowl.
2.
→ "Removing bowl", Page 31
Clean all parts that come into con-
3.
tact with food before using for the
first time.
→ "Cleaning and servicing",
Page 33
⁠ .
Put the cleaned and dried parts
4.
out ready for use.
7 Basic operation
ope r a t i o n
ope r a t i o n
7.1 Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
Pull the power cable out to the re-
1.
quired length.
To shorten the cable, push it into
2.
the cable storage compartment.
7.2 Moving the swivel arm
Press the release button and raise
1.
the swivel arm until it engages.
→ Fig.
3
a The swivel arm is fixed in posi-
tion 2.
Press the release button and move
2.
the swivel arm down until it en-
gages in the vertical position.
→ Fig. 4
a The swivel arm is fixed in posi-
tion 3.
7.3 Inserting bowl
▶ Place the bowl in the base unit.
→ Fig. 5
The bowl must be positioned
straight and firm on the base unit.
7.4 Removing bowl
▶ Lift and remove the bowl.
→ Fig. 6
7.5 Inserting tools
first time en
31