Stihl MSA 220.0 TC Gebrauchsanleitung Seite 55

22 Bar and Chain Combinations
22 Bar and Chain Combinations
22.1 STIHL MSA 220.0 T, MSA 220.0 TC Chainsaw
Pitch Drive link
gauge/
groove
width
3/8" P 1.1 mm
3/8" P 1.3 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
1)
If this guide bar is used, the chainsaw may be used only with a STIHL AP battery inserted directly in
the saw.
2)
If this guide bar is used in combination with saw chain 61 PS3 Pro (3699), the chainsaw may be
used only with a STIHL AP 500 S battery inserted directly in the saw.
23 Spare Parts and Accesso‐
ries
23.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
24 Disposal
24.1 Disposing of Chainsaw and
Battery
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
0458-007-9801-A
Length Guide bar
30 cm
Rollomatic E /
1)
35 cm
Light 04
1) 2)
40 cm
30 cm Rollomatic E /
Light 04
1)
35 cm
Rolloma‐
tic E Light /
1)
40 cm
Light P04
Number of Number of
teeth, spro‐ drive links
cket nose
44
50
9
55
44
50
9
55
25 EC Declaration of Con‐
formity
25.1 STIHL MSA 220.0 T,
MSA 220.0 TC Chainsaw
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Cordless chainsaw
– Manufacturer's brand: STIHL
– Model: MSA 220.0 T, serial number: MA01
– Model: MSA 220.0 TC, serial number: MA01
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN 55014‑1, EN 55014‑2, EN 62841‑1, and
EN 11681‑2 (where applicable).
The EC type examination test was carried out
pursuant to Directive 2006/42/EC, Art. 12.3(b) at:
VDE Prüf- u. Zertifizierungsinstitut (NB 0366),
Merianstraße 28, 63069 Offenbach, Germany
– Certification number: 40052944
English
Saw chain
61 PMM3 (Type
3610)
61 PS3 Pro (3699)
63 PM3 (3636)
63 PS3 (3616)
55