Werbung
weinor PergoTex II / LED / Basic | Pergola-Markise | Pergola-zonwering | Pergola awning | Store de pergola | weinor GmbH & Co. KG
Cleaning
en
Cleaning measure
• Remove debris from the whole
system!
• Clean the fabric and remove
coarse dirt from the pergola
awning fabric!
See also detailed description:
'Fabric cleaning' on the fol-
lowing pages.
• Clean powder-coated alumini-
um parts!
(NOT in the catchment area of
salt water)
• Clean powder-coated alumi-
nium parts and wash off salt
deposits!
(in the catchment area of salt
water)
• Remove deposits in the gutter
and in the gutter drains!
• Clean the leaf guard!
• Cleaning the VertiTex II vertical
awning (optional)
• See also the VertiTex II
operating and maintenance
instructions!
24
Technische Änderungen vorbehalten | Technische wijzigingen voorbehouden | We reserve the right to make technical changes | Sous réserve de modifications techniques
Interval
Cleaning materials / procedure
immedia-
• Remove debris, leaves and branches from the fabric, gutter downpipes, transport profiles and
tely
end caps!
once a
• Loose dirt such as dried bird droppings and insects can be removed with a brush if necessary!
year and
• General soiling or light stains can be treated with an approx. 5-10% solution of mild detergent
immedi-
and lukewarm water (max. 40°C) if necessary!
ately if
required
once a
• Only use pure water (max. temperature for 40 °C), if applicable with small quantities of neutral
year and
detergents (pH 7) in combination with soft, non-abrasive rags, cloths, microfibre cloths or
immedi-
brushes which do not damage the surfaces!
ately if
• Remove greasy, oil-based or sooty substances with white spirit or isopropyl alcohol (IPA) free
required
from aromatic compounds! Adhesive, silicone rubber or adhesive tape etc. residues must also
be removed using the same method! Remove firmly bonded remains mechanically with a soft
rubber!
• Maximum temperature for the surface temperature should not exceed 40°C when cleaning
and carry out cleaning preferably not in direct sunlight!
at least
• Maximum cleaning agent application time one hour! Repeated treatment if required after at
twice a
least 24 hours!
year
• Neither use steam-jet air ejectors nor high-pressure jet ejectors with dirt blasters! If using a
and if
high-pressure cleaner (with an Y nozzle), ensure 1m distance to the surface! Dry the surface
required
with a clean, non-fraying cloth!
• If required, conserve the surface (only with agents for powder-coated surfaces from the specia-
list retail business. Recommendation: PTFE products with long-term conservation properties!
• Do not use the following under any circumstances whatsoever: scratching, abrasive
agents, solvents (containing esters, ketones, polyvalent alcohols, aromatic compounds, glycol
ethers or halogenated hydrocarbons or similar), strongly acidic or superalkaline cleaning and
surface-active agents (all-purpose cleaning agents, degreasing agents etc.), cleaning agents
with an unknown composition!
once a
• Remove the leaf guard,
year and
clean and reinsert!
immedi-
• Clean with a brush or soft brush
ately if
or soft cleaning cloth!
required
once a
• Clean the cloth tab/zip fastener!
year and
• Clean the fabric guide profiles with a brush
immedi-
or soft brush or soft cleaning cloth!
ately if
• Remove any particles between the fabric
required
and the front profile of the vertical awning!
• Caution: Do not clean the vertical awning
with a high-pressure jet!
For Vertical sun protection VertiTex II
Rail guide/Zip with OptiStretch option:
• Clean fabric guide profile! As required, spray the fabric guide profiles with a silicone-
based spray (e.g. marine spray)!
Werbung
