Disposal; Labeling; Explanation Of Symbols - Companion Ctx Benutzerhandbuch

10.8.

Disposal

If you plan to discontinue the use of this laser system and intend to dispose of it or any of its parts or accessories, you must observe
the applicable regional legal provisions for its disposal. You may also contact your local distributor, authorized service center, or
LiteCure ® Customer Care for more information regarding the disposal of this laser system.

11. Labeling

11.1.

Explanation of Symbols

Symbol
Manufacturer
Date of manufacture
Catalog number
Serial number
Caution
Type B Applied Part
Do not dispose in unsorted
municipal waste (WEEE)
Laser Warning
Remote interlock connector
Foot Switch
Optical fiber applicator
Emergency Stop
Fuse
Protective earth (ground)
Follow Instructions
Power On/Off
USB Port
Nemko-CCL Safety Mark with
NRTL indicators
60601-1
Prescription devices
CE Marking of
Conformity
RSR-000929-000 (0)
Title
Indicates the medical device manufacturer, as defined in EU Directives 90/386/EEC,
93/42/EEC and 98/79/EC.
Indicates the date when the medical device was manufactured.
Indicates the manufacturer's catalog, or model, number so that the medical device
can be identified.
Indicates the manufacturer's serial number so that a specific medical device can be
identified.
Indicates the need for the user to consult the instructions for use for important
cautionary information such as warnings and precautions that cannot, for a variety of
reasons, be presented on the medical device itself.
Refers to the part of the medical device which comes into physical contact with the
patient in order for the device to carry out its intended function.
Equipment must not be disposed of as unsorted municipal waste.
Warning label for class 2 and higher laser radiation
Identifies remote interlock connection port
Identifies connection port for foot switch
Identifies connection port for hand piece fiber
Button used to terminate laser emission and shutdown the device in the event of an
emergency.
To identify fuse boxes or their location.
Note: Not user replaceable.
To identify any terminal which is not intended for connection to an external conductor
for protection against electrical shock in case of a fault, or the terminal of a protective
earth (ground).
Note: This is located inside the device.
Indicates the need for the user to consult the instructions for use prior to operating
the device.
Push/push power button
Connection for software updates and Instant Replay Backup / Restore
Indicates compliance with the Certification Body (Nemko-CCL) requirements
regarding Electrical Safety (60601-1) in the US and Canada
CAUTION – Federal law restricts this device to sale by or on the order of a licensed
practitioner licensed by the law of the State in which the practitioner practices to
use or order the use of the device.
Certification mark that indicates conformity with health, safety, and environmental
protection standards for products sold within the European Economic Area.
User Manual – CTX
Description
Page 22 of 25