Handpiece Setup; Localization Setup; Protocol Selection; Operation Screen (Protocols) - Companion Ctx Benutzerhandbuch

Unit Volume – sets the sound that will occur during laser emission. The unit volume can be set to Low, Medium,
or High with the option of a steady Tone or a Beep.
Operation Mode – sets how the operator controls the ON/OFF of laser emission. The operation mode can be set
to Foot Pedal or Finger Switch.
Operator ID – allows user to create, edit or delete custom Operator IDs.
Note: Operator ID Numbers 9000-9999 are reserved for existing or future administrative features and may not be selected by Users as
Operator ID Numbers.
Note: Once assigned, a PIN cannot be changed and may only be permanently deleted. Deleting an Operator ID will delete all treatments
associated with that PIN.
Note: Once an Operator ID Number has been assigned, this new PIN (or the default "Guest" PIN "1234") may also be used to login to the
laser at startup.
5.2.2.

Handpiece Setup

Override - The Override can be used by advanced users who do not want to hold down the finger switch throughout
the entire treatment. If the finger switch OVERRIDE setting is ON, pressing the finger switch for the first time will
turn the laser emission on and laser emission will continue to emit until the finger switch is depressed a second
time (or until the time remaining for laser emission counts down to zero).
5.2.3.

Localization Setup

Language – Allows user to select from English, Chinese, French, German, Japanese, Portuguese or Spanish.
Measurement – Allows user to between Imperial or Metric
systems of measurement.
Set Date/Time – Allows user to customize the date and time settings.
5.3.

Protocol Selection

After selecting Protocols on the Main Menu screen, the Select Species screen will prompt the user to select the species of
the patient.
Next, the Patient Characteristics screen will prompt the user to enter patient characteristics that can affect the absorption
or penetration of the light to the target tissue, including weight, body type, coat length, coat color, and skin color.
After the selection of patient characteristics, the user will be prompted to select the condition to treat.
Based on the condition selected, the user will be prompted to either:
1) Select the Area by Size,
2) Select Area(s) by Anatomy, or
3) The user will be taken directly to (Operation screen) Standby mode
Note: Only certain conditions will require selection of anatomic location – Arthritis, Pain/Trauma, and Edema/Swelling.
The software will determine the appropriate treatment power, treatment time and pulse frequency for the patient characteristics, selected
area, and condition. Press Next or  to proceed to Standby mode with the settings determined by the software. The selected parameters
will appear on the right side of the screen.
5.4.

Operation Screen (Protocols)

When using the preset protocols, the only parameter the user can modify is the Power Setting.
Each species/condition (protocol) selection also has recommended treatment heads programmed in that will be displayed underneath the
power dial when the user reaches the operation screen. The colored rings around the treatment head icons indicate the appropriate treatment
head(s) for the selected protocol and power setting. The following table summarizes the recommendation icons and their meanings:
RSR-000929-000 (0) User Manual – CTX Page 14 of 25