Komet EnDrive Gebrauchsanleitung Seite 28

28 | EnDrive - Step by Step Instructions
Motor Settings
Click here to select the operating modes of
the motor as described in Section 4.4.
• Autostop
• Autoreverse
• Reciproc stop
• Reciproc reverse
• Apex stop
The selection of autostop excludes autoreverse
and viceversa, and the selection of reciproc
stop excludes the selection of reciproc reverse
and viceversa.
Volume
Clicking here the volume can be adjusted in
4 steps: 0 - 25% - 50% - 75% - 100%.
SW Update
By clicking here, the device searches for avai-
lable Wi-Fi networks. By connecting to the pre-
ferred one, it is checked if a software update is
available and if so, the user is asked to down-
load and install it automatically.
Only software updates that have no significant
impact on this user manual are installed auto-
matically, such as bug fixes and minor changes
(only software versions with increment of the
second digit of software identification X.Y).
Software versions that have a significant
impact on the user manual (increment of the
first digit of software identification X.Y) can
only be done by the service center that provides
the updated version of this manual.
Keep the charger connected to the main unit
and the handpiece cable connected to the main
unit and handpiece while this operation is per-
formed; without the charger connected, the
update is not installed. During this operation,
treatment on the patient is not possible.
Check periodically for the availability of soft-
ware updates.
Default Settings
Clicking here all factory values of the device are
restored. Any custom torque, speed and angle
settings for each file are deleted. Motor set-
tings are autoreverse for continuous rotation,
reciprocate reverse for reciprocating motion.
The volume is set at 50%.
4.7 Automatic power off
EnDrive main unit will turn off automatically
after 5 minutes from the time of inactivity of
the handpiece and inactivity of the user on the
main unit itself, unless the main unit is connec-
ted to the charger. The handpiece will turn off 5
minutes after the main unit is turned off.