Komet EnDrive Gebrauchsanleitung Seite 26

26 | EnDrive - Step by Step Instructions
Clicking on + and - the relevant torque and
speed settings in the ranges of 0,4 - 5 Ncm
and 250-1000 rpm can be changed, respec-
tively, and can be saved clicking the check
mark. If a file is a reciproc one, it will only be
possible to change forward angle, reverse
angle, in the ranges 30°- 360°, and speed limi-
ted to 3 steps 250, 300, 350 rpm.
press to save the changed values
press to discard the changes
press to restore the default
settings of the file
the warning indicates that the
settings of the file are different
from default
Files Sequence Settings in the File System
Favorite file systems appear in the motor func-
tion screen. It is possible to select the favorite
files within the various file systems by selecting
from the complete library by clicking on the set-
tings icon next to the file system.
The blue symbol next to the file indicates that
it has been selected. Only the selected files
appear in the favorite systems, as described in
section 4.4.