Komet EnDrive Gebrauchsanleitung Seite 18

18 | EnDrive - Step by Step Instructions
The charging status icons (see section 4.8)
flash during the charging process. When
charging is complete, the icons stop flashing
and the system is ready for use. Check that the ON/OFF Button
icons indicate the charged battery status.
The external charger and handpiece cable can
now be disconnected from the main unit and
handpiece respectively, and the system is ready
to work.
With the main unit off and charger discon-
nected, turn it on by holding down the button on
the top or left side. The same welcome screens
will appear.
ON/OFF Button
With handpiece off and handpiece cable
disconnected, turn it on by pressing and holding
the on/off button for approximately 1 second:
ON/OFF Button