b) Deactivate alarm
Send an SMS from your smartphone with the command: Alarm Off
Reply from the weather station:
• Parameter is set successfully!
• Parameter setting failure!
• Some parameters setting failure! D At least one alarm parameter was not set correctly. Check the alarm param-
c) View current weather data
Send an SMS from your smartphone (depending on the software version) with the command:
Weather or Current Weather
Answer from the weather station: (all current data will be displayed)
Current:
Temp=14.1C // Humi=66% // ABSPressure=30.13inHg // RELPressure=29.98inHg // Wind=0.0km/h // Gust=0.0km/h
// Wind Dir=59deg // Dew Point=7.9C // Rain Rate=0.0mm/h // Daily Rain=0.0mm // Weekly Rain=0.0mm // Monthly
Rain=0.0mm // Light=70.68w/2 // UVI=0
d) Display the maximum data from the history
Send an SMS from your smartphone with the command: History Max
Reply from the weather station:
History Max:
Temp=14.1C // Humi=66% // Dew Point=7.9C // Wind=0.0km/h // Gust=0.0km/h // Rain Rate=60.0mm/h // Daily
Rain=12.0mm // Weekly Rain=18.2mm // Monthly Rain=30.7mm // Light=70.68w/m2 // UVI=0
e) Displays the maximum daily data
Send an SMS from your smartphone with the command: Today Max
Reply from the weather station:
Today Max:
Temp=14.1C // Humi=66% // Dew Point=7.9C // Wind=0.0km/h // Gust=0.0km/h // Rain Rate=60.0mm/h // Daily
Rain=12.0mm // Weekly Rain=18.2 mm // Monthly Rain=30.7mm // Light=70.68 w/m2 // UVI=0
f) Display the maximum daily data as well as the maximum data from the history
Send an SMS from your smartphone with the command: Max
Reply from the weather station:
The data from the history (History Max) as well as the daily data (Today Max) are displayed together.
D Deactivation was done successfully.
D No alarm parameters in the weather station were activated. Activate at least
one alarm parameter using the "Weather Logger GSM" software.
eters using the "Weather Logger GSM" software.
57