J) Alarm - Eurochron EGWS1000 Bedienungsanleitung

Under "Web server updated interval", configure how often you want to update the measurement data. For example, if
you enter 1 hour, measurement data will be uploaded to the Wunderground server every hour.

j) Alarm

Enter the trigger values for each measurement. To view the maximum trigger value for a particular measurement, run
the cursor over the corresponding field. To configure a negative trigger setting, enter a minus sign before the number.
To enable all alarms, select "Enable" under "Alarm all". If "Alarm all" is set to "Disable", you can enable or disable
alarms individually.
Under "Next Alarm SMS Interval", you can configure whether and how often the base station sends SMS alerts. If you
select "Never", the base station will not send an SMS alert when an alarm is triggered.
If you select "Minute", you can choose a send interval between 10 and 120 minutes. Example: You want to be notified
via SMS when the temperature reaches 25 °C. Enter "25" under "Temperature" and check the right-hand box. Enter
"10" under "Next Alarm SMS Interval", and then click "Save".
An SMS will be sent when the temperature exceeds 25 °C (no sooner than the saved time interval of 10 minutes). If
the temperature still exceeds 25 °C after 10 minutes, you will receive another SMS alert. This cycle continues until
the temperature drops below 25 °C.
48