K) Data Logger Interval; L) Current Weather - Eurochron EGWS1000 Bedienungsanleitung

k) Data Logger Interval

Under "Data Logger", you can configure how often you want measurements to be saved to the microSD card. You can
choose an interval between 5 and 240 minutes. We recommend selecting an interval between 30 and 60 minutes.
Click "Reset" to reset all values to the default settings.
Click "Read" to retrieve all entries.
Click "Max/Min Record" to view the record maximum/minimum values and the maximum/minimum values for the
current day.
Click "SDCard File" to view your measurement files. To read and process measurement data, remove the microSD
card from the base station and insert it into a card reader on your computer. Data is saved in CSV format. Transfer
data from the microSD card to your computer on a regular basis and delete the old data.
Click "Save All" to save all entries. Click "Exit" to close the program.

l) Current Weather

Measurements from the outdoor sensor are displayed under "Current Weather".
Under "Send Current Interval", choose how often you want to receive measure-
ments via SMS. For example, if you select 1 hour, the base station will send two
SMS messages each hour to the numbers you entered under "Telephone" (meas-
urements are sent in two messages). Refer to the following section for details on
the content of these SMS messages.
49