b) Time
The current date and time (as displayed on your computer) are listed under "Time". Click "Sync" to sync the time for
outdoor sensor data (listed under "Current Weather"). Refer to "(c) Time zone" and "d) Daylight Start Time" for more
information.
c) Time zone
Under "Time zone" you can change the time for the outdoor sensor data. Example: The time indicated under "Current
Weather" is one hour behind (11:00 instead of 12:00). You will need to select "+1" in the time zone settings. You can
adjust the time zone from +12 to -12.
d) Daylight Start Time
Some countries use daylight saving time during summer months. You can configure the daylight saving settings under
"Daylight Start Time". Example: Daylight saving time starts at the end of March. The "Start time" settings should be as
follows: Month = 3 (March), Week = 4 (fourth week), Hour = 1 (time adjusted forwards one hour).
If daylight saving time finishes at the end of October, the "End time" should be as follows: Month = 10 (October),
Week = 4 (fourth week), Hour = 1 (time adjusted backwards one hour).
Check the "DST" box to enable the settings.
45