Useful Information; Caractéristiques Techniques; Déclaration De Conformité Ue - Atlas Copco R2012 Produktspezifische Anweisungen

Safety Information
• Always operate against a workpiece, otherwise parts will
be ejected from the front of the tool.
• Never use without the stem collector fitted.
Operating hazards
• Use of the tool can expose the operator's hands to haz-
ards, including impacts, cuts and abrasions and heat.
Wear suitable gloves to protect the hands.
• Operators and maintenance personnel must be physically
able to handle the bulk, weight and power of the tool.
• Hold the tool correctly: be ready to counteract normal or
sudden movements – have both hands available.
• Always operate with the nose piece fitted, otherwise there
is a risk of finger crushing.
• Use only the recommended sizes and types of rivets. Use
with other sizes may be hazardous.
Repetitive motion hazards
• When using a power tool to perform work-related activi-
ties, the operator might experience discomfort in the
hands, arms, shoulders, neck, or other parts of the body.
• Adopt a comfortable posture whilst maintaining secure
footing and avoiding awkward or off-balance postures.
Changing posture during extended tasks can help avoid
discomfort and fatigue.
• Do not ignore symptoms such as persistent or recurring
discomfort, pain, throbbing, aching, tingling, numbness,
burning sensation, or stiffness. Stop using the tool, tell
your employer and consult a physician.
Noise and Vibration hazards
• High sound levels can cause permanent hearing loss and
other problems such as tinnitus. Use hearing protection as
recommended by your employer or occupational health
and safety regulations.
• Exposure to vibration can cause disabling damage to the
nerves and blood supply of the hands and arms. Wear
warm clothing and keep your hands warm and dry. If
numbness, tingling, pain or whitening of the skin occurs,
stop using tool, tell your employer and consult a physi-
cian.
• Hold the tool in a light but safe grip because the risk from
vibration is generally greater when the grip force is
higher. Where possible support the weight of the tool
with a balancer.
• Never hold the accessory with the free hand, as this in-
creases vibration exposure.
• To prevent unnecessary increases in noise and vibration
levels: Operate and maintain the tool, and select, maintain
and replace the accessories and consumables, in accor-
dance with this instruction manual.
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury or death.
Be aware of excess hose left on the walking or work sur-
face.
• Proceed with care in unfamiliar surroundings. Hidden
hazards may exist, such as electricity or other utility lines.
This tool is not insulated from coming into contact with
electric power sources.
6 © Atlas Copco Industrial Technique AB - 9846 0527 00
• This tool is not intended for use in potentially explosive
atmospheres.
Signs and Stickers
The product is fitted with signs and stickers containing impor-
tant information about personal safety and product mainte-
nance. The signs and stickers shall always be easy to read.
New signs and stickers can be ordered by using the spare
parts list.

Useful Information

ServAid
ServAid is a portal that is continuously updated and con-
tains Technical Information, such as:
• Regulatory and Safety Information
• Technical Data
• Installation, Operation and Service Instructions
• Spare Parts Lists
• Accessories
• Dimensional Drawings
Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local
Atlas Copco representative.
Caractéristiques techniques
Caractéristiques techniques
Pression de service maximum 7 bars
Ø filetage d'admission d'air
Consommation d'air
Course
Poids
Déclarations
DÉCLARATION DE CONFORMITÉ UE
Nous, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, déclarons sous notre seule et en-
tière responsabilité que le produit (dont le nom, le type et le
numéro de série figurent en première page) est en conformité
avec la ou les directives suivantes :
2006/42/EG
Normes harmonisées appliquées :
DIN EN ISO 12100:2011; DIN EN ISO 11148-1:2012; DIN
EN 82079-1:2013
R2012
1/4 pouces
2 - 4 l/rivet
10 mm
2.4 kg