Intended Use - Atlas Copco R2012 Produktspezifische Anweisungen

Safety Information
James McAllister, General Manager
Atlas Copco Ltd
Swallowdale Lane
Hemel Hempstead
Hertfordshire HP2 7EA
Regional Requirements
WARNING
This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more
information go to
https://www.p65warnings.ca.gov/
Safety
DO NOT DISCARD - GIVE TO USER
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the product
cease to be legible or become detached, replace without
delay.
• The product must only be installed, operated and serviced
by qualified personnel in an industrial environment.

Intended Use

This rivet gun is designed for inserting blind rivets into all
materials. This tool is designed to be hand held and to be used
only with recommended accessories. No other use permitted.
Indoor use only. For professional use only.
Product Specific Instructions
Installation
General Installation Safety
Have technical personnel to connect the compressed air sup-
ply to the tool.
Only hydraulic fluid recommended by the manufacturer shall
be used.
4 © Atlas Copco Industrial Technique AB - 9846 0527 00
Operation
General Operation Safety
WARNING Risk of Injury
Keep hands away from moving parts! Fingers could get
injured if they get between the rivet and the work piece.
Keep your hands away from the riveting points when
►
operating the tool.
Do not put your hands or fingers between the tool
►
and the work piece.
Always use the adequate personal protective equip-
►
ment on your job site.
WARNING Projectile Hazard
Do not direct the tool against anyone. Rivets could be
flung from the tool producing severe injuries, especially
to the eyes.
Wear safety googles.
►
Operation guidelines
• This tool is designed to be used solely for the purpose of
setting blind rivets. Never use the tool as a hammer.
• Never use without the stem collector fitted.
• Never overload the tool. Work within the specified work-
ing capacity.
• Do not exceed the permitted working pressure.
• Do not use the tool without a workpiece.
• Do not rivet outside of the riveting holes.
• Never turn the tool towards yourself or towards other
people.
• Be aware of that the blind rivet could be flung from the
tool.
• Always wear protective goggles when working with the
tool. Personal protective equipment such as protective
clothing, gloves, safety helmet, non-slip footwear, ear
protection and fall arresting device is recommended.
• The stem collector must remain mounted on the tool dur-
ing operation.
• When putting down the tool, make sure that it is placed
on a stable position on a stable surface from which it can-
not fall.
Hydraulic handling
• Avoid excessive contact with hydraulic oil. If irritation of
the skin occurs, wash the affected skin parts thoroughly
with water.
• Disconnect the power supply and depressurize the hy-
draulic system before disconnecting or connecting hoses,
fittings, or accessories.
• Never grab, touch, or in any way come in contact with a
hydraulic pressure leak. Escaping oil can penetrate the
skin and cause severe injury.
R2012