Herunterladen Diese Seite drucken

Novoferm iso70-2 TW Original-Montage- Und Betriebsanleitung Seite 21

Sektionaltore mit torsionsfederwelle

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
2.5
Potential hazards associated with the
product
The product has undergone a risk assessment. The
product's design and construction, which are based
on this risk assessment, correspond to the current
state-of-the-art. The product is safe to operate when
used as intended. Nevertheless, residual risks re-
main.
Impact and crush hazard due to the
WARNING
door movement!
When the door is actuated, the opening
and closing processes must be mon-
itored.
The garage door must be visible
from the place of operation.
Make sure that no objects or per-
sons, particularly children, are in the
door's movement area during oper-
ation.
Always keep the opening range
clear.
Hazardous tensioned springs!
WARNING
Springs are under high torque and can
release large forces when being ten-
sioned or when being relieved from ten-
sion.
Wear suitable personal protective
equipment when tensioning the
springs or when relieving them from
tension.
Risk of injury due to high rope
WARNING
tension
The ropes are under high tension. Dam-
aged ropes can tear and cause severe
injuries.
Prior to replacing damaged ropes or
springs, secure the door against un-
controlled movements.
Regularly check the ropes. Dam-
aged ropes must be replaced imme-
diately.
These assembly, operation and maintenance instructions must be kept for the entire period of use!
3
Product description
3.1
General product overview
Fig. 1: Product view
VL
Fig. 2: Front-mounted torsion spring shaft (VL version)
Fig. 3: Rear-mounted torsion spring shaft (HL version)
HL
EN - 21

Werbung

loading