Brief Instructions On Direct Operation - Sentiotec Cv 3 Montageanweisung, Gebrauchsanweisung

1 Brief instructions on direct ope-
ration
1.1 Use the ON/OFF switch 1 to turn on the control
unit.
The LEDs 9 - D light up for approx. 5 seconds.
-
The LED TIME D lights up.
-
- The display 5 indicates the time and the LED
TIME D lights up.
1.2 Use the Light 2 switch to independently control
the cabin lighting.
1.3 Which functions are available?
X = adjustable O = adjustable & controllable
Menu
SAUNA
functions
TIME Current time
X
Indiv idual start-time for automatic
X
START
operation
TIME X Adjustable operating time
The desired temperature can be
TEMP O
selected.
The fan speed can be selected
VENT X
(0% - 100%).
32
Operating instructions for the user 8
Meaning
1 Brief instructions on direct ope-
ration
1.4 How can I select the individual menu
items?
Use the UP/DOWN buttons 7 to scroll up or down
through the various menu items. The LED 9 - D
indicates the selected menu item. If you press and
hold down one of the buttons 8 for a little while,
an automatic cycle will start and take you through
all menu items available.
1.5 How can I adjust the individual menu
items?
After selecting a menu function, press PROG 8.
The display 5 starts to flash. While the display
is flashing you can use the UP/DOWN buttons 7
to increase or decrease the value. Once you have
entered the desired value, press PROG/OK 8.
The adjusted value is accepted and the display 5
stops flashing. If you press and hold down the UP/
DOWN buttons 7 when the display is flashing,
a "quick adjustment" is initiated.
1.6 By pressing START/STOP 6 it is possible to start
or stop the "direct operation".
NOTE: What is a target value or an actual
value?
Target value = the value that you set, specify the
value you desire to have.
e.g. 90° C
Actual value = the value that is currently indicated
in the cabin.
e.g. 85° C.