Korg KingKORG NEO Bedienungsanleitung Seite 6

KingKORG NEO Owner's Manual
Front panel (OSCILLATOR/FILTER/AMP)
OSC SELECT button
Use this to select the oscillator number that you want to
control.
The LED of the currently selected oscillator will light up.
OSCILLATOR TYPE dial (with push function)
This selects the oscillator type.
By pressing the dial you can jump to the beginning of
the categories Off, ANALOG, DWGS, PCM, or MIC IN.
OSCILLATOR sub display
This shows information about the oscillator that's
currently selected.
OSCILLATOR controls
These knobs edit the parameters of each oscillator.
TUNE (LEVEL) knob
This adjusts the amount of detune relative to the
basic pitch. By holding down the SHIFT/EXIT
bu on and turning this knob, you can make
adjustments in semitone steps.
CONTROL knob
This adjusts the oscillator's CONTROL 1 parameter.
The parameter will depend on the oscillator type
you've selected. By holding down the SHIFT/EXIT
bu on and turning this knob, you can adjust the
CONTROL 2 parameter (PG: "2. Timbre
parameters").
PORTA. TIME knob
This adjusts the portament time.
PORTAMENTO button
This is an on/off bu on for the portamento effect, which
creates a smooth transition to a note of a different pitch.
6
FILTER CUTOFF knob
This knob adjusts the filter cutoff frequency.
FILTER sub display
This shows information about the filter that's
currently selected.
AMP LEVEL knob
This adjusts the volume of the timbre.
FILTER controls
These knobs edit the filter parameters.
RESONANCE knob
This adjusts the amount of filter resonance.
EG INT (KEY TRK) knob
This adjusts the depth that the EG will vary
the cutoff frequency over time.
By holding down the SHIFT/EXIT bu on
and turning this knob, you can adjust the
depth that the the cutoff frequency will be
affected by your keyboard playing position
(i.e., high to low notes).
UNISON button
This turns the timbre's
Voice Unison function
on/off.
By pressing this bu on
while holding down the
SHIFT/EXIT bu on, you
can jump to the unison
voice se ing screen.
FILTER TYPE (−)
button
Switches between filter
types. By holding down
the SHIFT/EXIT bu on
and pressing this bu on,
you can step backward
through the choices (05
04 03 02 01...).