IFM Electronic Ecomat200 Monitor FD-1 Betriebsanleitung Seite 38

FD-1/FD-1N
MONITOR
Display mode:
By pressing the push-button briefly the unit changes from the Run mode to the
Display mode. Internally the unit remains in the operating mode (thus the indicator
"RUN" remains in the display). Irrespective of this, all parameters as well as the set
parameter values can be indicated without changing them.
First of all select the parameter range. The unit has 2 parameter ranges, the number of
CH1 RUN
the selected range is displayed by stepping through the parameters
,
CH1 RUN
. When the unit has passed to the Display mode, the indicator is in the
parameter range 1, by pressing the push-button briefly you get to the parameter
range 2.
Within the parameter range the next/preceding parameter can be selected by pres-
sing the or push-buttons. It is displayed by the parameter abbreviation in the 3-
digit alphanumeric display. The current (preset) parameter value is displayed in the
5-digit numerical display.
CH1 RUN
Example: = for switching function for output 1.
Terminate the Display mode and return to the Run mode by pressing the push-
button for approx. 3s. When no push-button is pressed for approx. 15 s (timeout),
the unit automatically returns to the Run mode.
Programming mode:
Select the programming mode by
• changing to the Display mode first,
• then selecting the parameter you would like to change
• and then by pressing the push-button briefly.
Internally the unit also remains in the operating mode. This means that it continues
its monitoring function with the existing parameters until the change has been
stored. In the display the RUN indicator is indicated next to the PRG indicator. In
addition the parameter abbreviation is flashing in the 3-digit alphanumeric display.
You can now change the parameter value within the permissible range of values by
the push-buttons or . The set parameters are stored by pressing the push-
button until the PRG indicator no longer flashes. As soon as the PRG indicator is no
longer displayed, you can release the push-button. The new value is permanently
stored and effective immediately.
page 38