Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.1. PURPOSE OF MANUAL
Congratulations on the purchase of your
FWT
AcuCam Concept IV
System! This system was designed to meet the
highest expectations of dental professionals for
image quality, ease of use, and reliability. We
are sure you will be delighted with this product
for years to come. In addition to innovative
designs, we back our products with strong
customer service and competent technical
support.
2.2. LIMITATION OF MANUAL AND PRODUCT
This manual provides suggestions on how to
connect the AcuCam Concept IV
computer via a FireWire connection. Refer to
your imaging software's owner manual for
detailed imaging capture and enhancement
instructions. Refer to the printer's owner manual
for proper installation, adjustment, and operation
of that device.
FWT
The Concept IV
is precisely factory set to
produce high resolution, full-color video via
FireWire transmission standards and video
2.3. PRODUCT INTRODUCTION
The AcuCam Concept IV
system is the latest addition to the Concept IV
product line. This product provides the best
digital image quality and simplest installation
and operation with a computer by eliminating
the need for a video capture board. Video is
transmitted losslessly directly to your imaging
software. The Concept IV
conveniences of digital imaging with the same
brilliant high-resolution images of the Concept
FWT
AcuCam Concept IV
Intraoral Camera
FWT
to a
FWT
intraoral camera
FWT
provides the
5
Section 2: Product Introduction
and General Description
This manual provides essential information
necessary for proper installation, operation, and
routine servicing of the AcuCam Concept IV
Intraoral Camera System. If more information is
required, please contact Gendex Technical
Support at
1-800-769-2909 or your local contact listed in
Appendix B.
standards. The only adjustments to this
equipment are via the software. The computer,
graphics card, and monitor all must be
compatible and properly adjusted in order to
reproduce the best quality images. Refer to your
imaging software for approved hardware
configurations.
NOTE: Please make sure your computer and
imaging software are properly installed and
operating prior to contacting Gendex for
technical support.
IV for analog environments. The Concept IV
shares the same great camera handpiece design
with the Concept IV, but now takes the image
directly to the computer via a digital connection.
The docking station generates a truly
uncompressed digital live video output
according to the IEEE1394a standard (also
known as FireWire or i.LINK). The Concept
FWT
IV
also provides an analog output signal for
video monitors.
Operation Manual and Installation Guide
FWT
FWT
Werbung
