Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Holster: Wall or Cabinet Mounting ------------------------------------------------------------------------------
Use the holster back plate or the holster mount
template to find a suitable location for attaching
to a wall or to a cabinet.
WARNING: Electrical shock or fire hazard.
Installation must comply with local
ordinances governing electrical and cable
installations. Consult a licensed electrical
contractor for local building codes before
proceeding. In case of cabinet-mounting,
consult the cabinet manufacturer for details
3.4. WIRING THE ACUCAM CONCEPT IV
Below is a simplified AcuCam Concept IV
system wiring diagram. The docking station is
connected to the computer via the FireWire
connection. The image capture software displays
the digital dataflow on the computer monitor.
Optional
TV Monitor
Holster
FWT
AcuCam Concept IV
FWT
SYSTEM
FWT
Computer Screen
Docking
Station
Computer Printer
Footswitch
20
on eventual electric cables hidden in the
cabinet before proceeding.
Attach the holster with two (2) #6 wood screws,
at least 1' (25.4 mm) long. In case of a cabinet-
mounting, use the maximum wood screw length
allowed by the cabinet. Do not exceed the
cabinet panel thickness not to damage the
cabinet esthetics. See holster mount template
for additional information. Part # 032-0159P1.
The docking station can also be connected
directly to a TV monitor; however, there will be
no way to display images captured in the
computer.
Personal
Computer
Operation Manual and Installation Guide
Firewire
Connector
Werbung
