4.3. HOLDING THE HANDPIECE
The AcuCam Concept IV handpiece is a
sophisticated, ergonomically designed intraoral
camera. It can be easily manipulated single-
handedly while providing complete intraoral
access. Further, the lightweight camera head and
low torque monocoil cable ensure minimal hand
fatigue.
The camera is designed to provide tactile and
visual reference points to facilitate hand-eye
coordination. First, dimples in the camera head
provide tactile reference points to where the
camera is aimed. Grasp the camera head like a
Handling the Camera
4.4.
Axial View of Concept IV
FWT
AcuCam Concept IV
Direction of
View
Index Finger and
Thumb Always at
the 10 & 2 o'clock
Positions
Direction of
View
23
pencil or a mirror, with the barrel resting inn the
recess between your index finger and thumb.
Your index finger and thumb should rest on the
dimples at the 10 and 2 o'clock positions. These
dimples will help you aim the camera in 90-
degree increments. See diagrams below for
further reference.
The red focus dot on the barrel of the camera
head also provides a visual reference point. The
dot is exactly opposite the direction of view.
Therefore, it is always important to locate this
point when starting an exam.
Red Dot is 180º from
Direction of View
Dimples Provide
Tactile Reference
90°
Operation Manual and Installation Guide