Replacing The Fuse; Troubleshooting; Possible Cause - Dometic POWER & CONTROL SC330 Montage- Und Bedienungsanleitung

Regularly check live cables or lines for insulation faults, breaks, or loose connections.

Replacing the fuse

WARNING! Electrocution hazard
The device fuse may only be replaced by qualified personnel.
Replace the fuse as shown in


12 Troubleshooting

Problem
The solar charge controller does not
work. The LEDs do not light up.
Fig.  on page 21. Use the spare fuse provided.

Possible cause

Insulation faults, breaks or loose con-
nections at the live cables.
Suggested remedy
Check live cables for insulation
faults, breaks, or loose connec-
tions.
If you cannot find an error, con-
tact an authorized service agent.
EN
21