Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Option 2: On the chain guard (part 14 modified, part 15.
7.9 | Should you lose the nib...
...you can make new nibs yourself. To do so, use the left-over
piece of the vacuum tube (part 3) or order replacement nibs
(Order no. 10003163) from www.louis-moto.co.uk
Cut the other end at a
45° angle.
Heat the straight end with a
match/cigarette lighter until a
bulge forms.
24
Cut off a piece of the
vacuum tube (part 3).
7.10 | Additional parts
1
2
1
8 mm T-piece
8 mm T-piece with rubber cap
2
3
M6 brass spigot
4
Universal adapter
Some vehicle models require special parts for creating the
vacuum connection. These are available free of charge from
Scottoiler or at your nearest Louis store. To check whether
you need any additional parts, refer to the model-specific
installation instructions.
8 | Storage
Store the Louis Special Edition Scottoiler in the original
packaging, in a closed room which is protected from the
weather and moisture, until it is installed.
9 | Cleaning and care
NOTE!
Risk of damage!
Improper handling of the Louis Special
Edition Scottoiler can lead to damage of the
Scottoiler.
Do not use aggressive cleaning agents,
brushes with metal or nylon bristles, or sharp
3
4
(SC-RM-150245)
(SC-SA-0155)
(SC-RM-150135)
(SC-SA-0095)
Werbung
