Parkside PKS 2200 A1 Originalbetriebsanleitung Seite 33

Function description
The chainsaw is driven by an electric mo-
tor. The circulating chain is led around a
saw bar (guide rail).
The tool is fitted with a rapid-action chain-
tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various pro-
tection fittings for the protection of the user.
Refer to the following descriptions for the
function of control elements.
Technical Data
Electrical chainsaw ............... PKS 2200 A1
Rated input voltage U .. 230-240 V~, 50 Hz
Input power P ............................2200 W
Safety class ......................................
Protection category........................... IPX0
Chain speed v .........................15.3 m/s
0
Weight
(without guide rail and chain) .........4.4 kg
Weight (with guide rail and chain) ..5.1 kg
Oiltank ...........................approx. 250 ml
Chain ....................... TRILINK CL15057TL
Chain pitch .................................3/8"
Chain width ............................ 1.3 mm
Teeth of the sprocket chain wheel ........ 6
Chain bar ........................... Parkside 16"
Kangxin 16" AP16-57-507P
Length of the chain bar ............... 460 mm
Sawing length ........................... 395 mm
Acoustic pressure level
(L ) ....................... 93.4 dB; K
pA
Sound power level (L
measured ........106.7 dB; K
guaranteed ............................. 107 dB
Vibration (a ) .......5.53 m/s
h
Levels of noise and vibration were determi-
ned according to the standards and regula-
tions in the declaration of conformity.
= 3 dB
pA
)
WA
= 2.60 dB
WA
; K= 1.5 m/s
2
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specified total vibration value and the
stated specified noise emission value can
also be used for a provisional assessment of
the load.
Warning:
The vibration and noise emissions
may deviate from the specified values
during actual use of the power tool,
depending on how the power tool is
being used and, in particular, what
kind of material is being worked on.
Safety measures for the protection
of the operator are to be determi-
II ned that are based on an estimate
of the actual vibration load under
the real operating conditions (for
this, all parts of the operating cycle
are to be taken into account, for
example, times in which the electric
tool is turned off, and those during
which it is turned on but running
without a load).
Notes on safety
This section deals with the basic safety
regulations while working with the electric
chainsaw.
An electric chainsaw is a danger-
ous device, which can cause seri-
ous or even fatal injuries with incor-
rect or careless use. Thus, for your
own safety and the safety of others,
2
you should always take note of the
instructions on safety and, in case
of difficulties, consult a specialist for
advice.
GB
33