Checking The Oil Pollution Filter Indicator; Changing The Oil Filter; Drive Gearbox Of The Horizontal Mower Knife - Ziegler CLAAS CERIO Betriebs- Und Bedienungsanleitung

MAINTENANCE
Figure 43
Oil grade: See lubrication table.
Screw in the locking screw and close the protective hood.
5.4

Checking the oil pollution filter indicator

Remove the locking screws (P) of the hood and open the left side protection (V). (Figure 44
Check the oil pollution filter indicator A. If the pointer appears on the red field, replace the oil filter. (Figure 44)
Figure 44
5.5

Changing the oil filter

Drain the hydraulic oil.
Unscrew the hood from the housing.
Pull out the holder with the oil filter.
Remove the oil filter from the holder and insert the new filter.
Let the oil flow out.
Insert the holder with the attached oil filter.
Check the O-Ring in the hood and replace it if necessary, then screw the hood in tight.
Fill in the hydraulic oil until the level has reached half of the oil-level glass.
5.6

Drive gearbox of the horizontal mower knife

Lubricate the knife drive head. Figure 45)
Type of lubricant - see lubrication table.
Remove the locking screws (V) of the hood and open the left side protection (P). (Figure 45)
Turn the driving wheel of the head piece and adjust the knife head in such a manner that a favourable lubrication position is
reached.
ENVIRONMENT!
Dispose of the oil filter in accordance with applicable regulations.
DANGER!
Only use original oil filters.
26