Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Switch on the battery breaker. Lift the safety support (S) and block it in the holder (R) (Figure 27).
Figure 27
Drive carefully with the combine to the rapeseed header extension. While doing so, pay attention to the central part of the outer
skin. The outer skin must be pushed over the bayonet of the grain header in its entire width.
Insert the tensioning device (9) on the left side and tighten it. (Figure 28
Figure 28
Secure the rapeseed header extension to the lower slide shoe on the right and left-hand side using a strap (N) and bolt (Figure
29), (Figure 30)
Figure 29
Insert the upper bolt clamping unit on the right and insert the fastening clamp for the inclined slide shoe (Figure 30)
20
Werbung
