Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Dismantle the display (K) on the right-hand and left-hand side walls. Figure 14
Figure 14
Figure 15
The side wall of the header extension is prepared for connection with the rapeseed header extension.
!
3.2
Dismantling from the blade drive CERIO bevel gearing. Figure 16
Unscrew the four hex socket bolts (P) which secure the drive shaft to the bevel gearing (N).
Unscrew the three screws (E) which secure the CERIO bevel gearing to the side wall of the header extension.
Remove the chain tensioner. Open the drive chain. (Figure 17)
Unscrew the drive shaft protection 13 on the left-hand side behind the header extension. (Figure 18 and Figure 19)
Unlock the cross-connection piece 17 on the drive shaft. (Figure 19)
Dismantle the gearing together with the cross-connection piece and the screw conveyor drive sprocket. (Abb. 20)
!
PLEASE NOTE !
You require the mower knife drive belt to to restore the original state.
PLEASE NOTE !
You require the fastening bolts and gearing to restore the original state .
15
Werbung
