Ziegler CLAAS CERIO Betriebs- Und Bedienungsanleitung Seite 53

OPERATION
OPERATION
4.1 Side knife protective strips
Figure 39
When working, keep sufficient safety distance to the side knives!
4.2 Switching the left side knife on and off
The left side knife is usually only used for half-cutting. Therefore, it should be switched on only if it is really necessary.
The left side knife can be switched on and off by using the tilt switch valve. (see arrow). (Figure 41)
Figure 41
DANGER!
When driving on public roads, the knife protection (S)must be attached to the right and left (if
installed) side knife.(Fig.1)
Figure 40
24