MAINTENANCE
Figure 45
Lubrication of the knife drive gearbox (Figure 44)
The Schumacher gearbox requires periodic lubrication with lubricating grease.
Remove the locking screws (P) of the hood and open the left side protection (V).
Lubricate the corner lubricator.
Figure 46
5.7
Vertical side knife
Vertical side knife
Lubricate the lubrication nipple in both vertical side cutters every 40 operating hours.
Remove the corresponding protection (B) by unscrewing the hex socket bolts (A).
Place the lubrication nipple on the crankshaft over the hole (S).
After lubrication, return the corresponding protective parts.
(Figure 47)
Figure 47
27