Werbung
Verfügbare Sprachen
Verfügbare Sprachen
[6] OPERATION
Preparations for playback
1. Checking connections
e Referring to the connection
diagrams (Pages 6 to 7)
check
to make
sure
that the connections
are made
properly.
e Check that the left and right speakers are connected
properly and also that the polarity (@ , ©) is correct.
e Check that the left and right sides of the pin plug cords
are connected
properly.
e Check that each cord is securely connected.
@ Check that each cord is of the proper type.
2. Checking the positions of the controls
(See Pages
8 to 10 for a reference
to the circled
numbers.)
e Turn the MASTER VOLUME control fully counterclock-
wise to the "0" position.
e Set the BALANCE ®, BASS @®, and TREBLE @ controls
to their center positions.
After making the above checks, press POWER switch @ to switch on
the power.
The amplifier will be operable when the LED of the STANDBY control
stops flashing after several seconds of muting.
Note on playback
The sound will be interrupted if one of the FUNCTION selector buttons @ is pressed during playback. This is due to
the operation of the muting circuit which prevents noise from being amplified at the time of switching, and is not a
malfunction.
e When
using the accompanying
remote control unit, press the corresponding
button.
For details, see Page 11 of Section [5] REMOTE
CONTROL
UNIT.
VIDEO
SELECT
button
AUDIO
FUNCTION
selector button
14
@ wer Oooo
Volume
control
VIDEO
FUNCTION
selector button
1. Playing a program
source
(Normal playback)
(1]
Select the desired program source by pressing the
AUDIO
FUNCTION
selector
button
or the VIDEO
FUNCTION
selector button.
e AUDIO FUNCTION
SELECTOR
(Setting the program
source)
Program source
To listen to a record
To listen to a CD
To listen to FM
or AM
broadcasts
e VIDEO
FUNCTION
SELECTOR
(Setting the video program source)
Video
program
source
MFD
display
VDP/DBS
VCR-2
To play the video disc player connected
to the VDP/DBS
jacks or to watch
satellite broadcasts
To watch the video camcorder's
equipped
with playback function
or
another component
connected
to
the (front panel) VIDEO-AUX jacks
MFD display
Begin playback of the program source.
For operating details, see the manual of the respec-
tive component.
Adjust the volume and tone.
2. TAPE MONITOR
(Listening
to the sound
of the DAT
or tape deck
connected to the DAT/TAPE-1
or DAT/TAPE-2 jacks)
Press the TAPE MONITOR button or the DAT/TAPE-1
or DAT/TAPE-2
button on the remote
control unit.
MFD
display
* This is displayed when
DAT/TAPE-1
is selected.
Begin playback of the program
source.
For instructions on operation, refer to the manual of
the corresponding
component.
Adjust the volume.
Copying tapes
When the deck for playback is set to DAT/TAPE-1,
the
DAT/TAPE-1
audio
signals
are
automatically
output from the DAT/TAPE-2
jacks.
Also, when
the deck for playback is set to DAT/
TAPE-2,
the DAT/TAPE-2
audio signals are auto-
matically output from the DAT/TAPE-1
jacks. When
this is done, the sound being recorded cannot be
monitored.
NOTES:
e When monitoring tapes, the audio (video) signals
selected with the VIDEO
or AUDIO
FUNCTION
selector button are output to the VCR-1 and VCR-2
VIDEO REC OUT jacks and the REC OUT jacks of
the
DAT/tape
deck
which
is currently
being
monitored.
,
The mode automatically switches to the bypass
mode when using the tape monitor function in the
Hi-Vision mode.
Do not press the TAPE MONITOR, DAT/TAPE-1 or
DAT/TAPE-2
buttons during tape monitoring or
tape copying, as doing so switches the recording
source.
The
CD
direct function
cannot
be used
when
monitoring
tapes.
3. Simulcast playback
(Playing video and audio sources)
Select the program source you wish to listen to with
the AUDIO FUNCTION selector or the VIDEO FUNC-
TION selector.
MFD
display
Hold down the VIDEO SELECT button for the video
program
source
you wish to watch.
MFD
display
Begin playback of the program
source.
For operating details, see the manual of the respec-
tive component.
[4] Adjust the volume and tone.
*
Note that when
the VIDEO
FUNCTION
button
is
again
used
to select the video
program
source
during Simulcast playback, the Simulcast playback
will be cancelled
automatically.
Werbung
