Carl Valentin Dynacode IP53 Kurzanleitung Seite 129

Key:
Minimal print speed
Print offset border
calculation
Key:
Printhead up time
Key:
Printhead valve reaction
time
Key:
Ribbon motor stop delay
time
Key:
Field ribbon saving
Rewind speed
Key:
Speed 1 field
Key:
Tension
Mode: Shift
X-Shift / Y-Shift
Key:
Lanes / R-Shift
Key:
Expert parameters
Mode: SaveStrt
Expert parameters
MinSpeed = minimal print speed:
If the min. print speed is increased, the max. number of cycles is also increased.
Calcoff = Turn On/Off print offset border calculation:
If this parameter is set to Off, then a smaller offset as the required print offset can be entered.
PHupT = printhead up time in ms:
Is used from ribbon save algorithm to calculate if a field ribbon save can be made or not.
PhVReactT = valve reaction time in ms:
The time is calculated when to start with printhead upward movement.
RibMotStpDlayT = ribbon motor stop delay time
Delay time in ms in which the transfer ribbon motor is still moved with constant speed before
stopping.
FieldRS = field ribbon saving:
Off: Field ribbon save switched off.
Normal: Field ribbon save is only accomplished if the transfer ribbon motor can be completely
stopped.
PHOnly: Only the printhead is moved. The transfer ribbon does not stop.
Strong: Field ribbon save is even accomplished if the transfer ribbon motor cannot be stopped.
Rwind v = rewind speed in mm/s:
Indication of rewind in mm/s.
If 0 (default value) is set, the parameter has no influence to the ribbon save.
Indication of length that is transported forwards after measuring the transfer ribbon.
X-Shift: Indication of displacement of the printout in X direction.
Y-Shift: Indication of displacement of the printout in printing direction.
Lanes: Indication of number of lanes printed side by side.
R-Shift: Indication of distance when changing to a new lane.
Password protected menu
Enter password and press key
See mode 'Standard' for description of the parameters.
Password protected menu
Enter password and press key
See mode 'Standard' for description of the parameters.
English
to confirm the entry.
to confirm the entry.
Dynacode IP
129