Important Information For Your Safety; Intended Use - Sentiotec Pro B2 Montage- Und Gebrauchsanweisungen

Instructions for installation and use p. 6/38

2. Important information for your safety

The PRO B2 / PRO B3 sauna control unit has been manufactured
in accordance with the applicable safety regulations. However,
hazards may arise during use. Therefore adhere to the following
safety information and the specific warning notices in the individ-
ual chapters. Also observe the safety information for the devices
connected.

2.1. Intended use

The PRO B2 / PRO B3 sauna control unit is used exclusively for
operating and controlling the sauna functions in accordance with
the technical data.
The PRO B2 / PRO B3 sauna control unit may only be used for
operating and controlling a sauna heater which has been certified
as satisfying the combustion test described in paragraph 19.101
of EN 60335-2-53. If the heater does not meet this requirement,
an appropriate safety precaution must be taken (for example: Con-
necting the safety shut-off/door sensor, see 5.8 on page 20).
The PRO B2 / PRO B3 sauna control unit may only be used for
operating and controlling 3 heating circuits with a maximum heating
output of 3.5 kW per heating circuit. The maximum vaporizer output
(PRO B3 only) is 3.5 kW.
Any use exceeding this scope is considered improper use. Improper
use can result in damage to the product, severe injuries or death.