Cancelling The Preset Time Function; Cancelling The Post-Drying Program (Pro B3 Only); Switching Off Sauna Mode; Switching Off The Sauna Control Unit - Sentiotec Pro B2 Montage- Und Gebrauchsanweisungen

Instructions for use for the user

9.9. Cancelling the preset time function

● Hold down the preset time button
the preset time function.
► The preset time countdown is cancelled.
► The current temperature in the cabin is displayed in the temperature
display
4

9.10. Cancelling the post-drying program (PRO B3 only)

After combined mode, the post-drying programme is started automatically. This
involves heating the sauna cabin to 80°C with the fan running. (Standard = 30
minutes – depending on the setting in the technician menu). The text "dry" ap-
pears in the temperature display
● Hold down the temperature selector
cancel the post-drying program.
To prevent mould and rot from forming, the post-drying programme
should NOT be stopped.

9.11. Switching off sauna mode

● Press the temperature selector
► The sauna heater switches off. For the PRO B3, after combi mode (at least
3 minutes), the post-drying program is started automatically.

9.12. Switching off the sauna control unit

● Press the ON/OFF switch
► The humidity display
► The sauna control unit is switched off.
7
. In single-sensor mode, the preset temperature is displayed.
.
4
3
, to switch off the sauna control unit.
6
and the temperature display
1
for three seconds (long press) to cancel
for three seconds (long press) to
3
.
p. 33/38
go out.
4
EN