TERMA SKT 1 Gebrauchsanweisung Seite 95

Dryer mode (timer)
Dryer in the Remote Mode is operated in exactly the same way as in
the Local Mode, meaning that it is operated via the SKT 4 controller:
• press button to activate the Dryer
• press button a few times to modify Dryer operating time
• press buttons to set the required temperature level during
Dryer operation (see: Local Mode operation — Dryer Mode).
The controller will automatically switch to the Remote Mode on ex-
piry of the set time.
Use of the remote transmitter
Detailed description of the basic and advanced features of the IR
transmitter depends on a given type (please see user manual at-
tached to your IR transmitter). Examples of features of an IR trans-
mitter — type DTIR1:
• control of temperature inside the room measurement and tem-
perature regulation in the place where the transmitter is located
is usually better than in the device located near the radiator
• possibility to program two temperature settings: Comfort and Eco-
nomical and easy switch from one to the other
• automatic temperature adjustment program for Comfort and Eco-
nomical setting during a 24 hour period (24-hour timer)
• automatic dryer program
EN
• automatic Anti-freeze program with possibility to adjust the oper-
ation threshold
• possibility to adjust the temperature sensor according to the spe-
cific conditions of a given interior (calibration feature).
No signal detection (automatic feature)
The transmitter sends a controlling signal every 10 minutes in order
to check the quality of communication between the two devices.
Interruption or lack of 3 subsequent signals (30 minutes) will result
in automatic changeover of the SKT 4 controller to the Local Mode
with the '0' setting. The controller will wait for communication to
resume (display panel will show '0' and
Having received the controlling signal, the device will automatically
return to remote operation.
User Manual — Electric heating elements of the SKT series
icon will start flashing).
95