TERMA SKT 1 Gebrauchsanweisung Seite 86

TROUBLESHOOTING
Problème Possible cause
Device is connected to Device is not turned on
electricity, no diodes
are on, heating element
Problem with connec-
does not heat
tion or power supply
Heating element does Possible incorrect
not heat, both diodes installation of controller
are flashing alternately on the heating element
Device heats although Possible electronics
it has been turned off damage
the button
In any other situations, disconnect the device from electricity, wait for theradiator
to cool down and turn it back on again. If the problem persists, pleasecontact your
local Distributor.
User Manual — Electric heating elements of the SKT series
86
Problem solution
Turn the device on with the
button
Check the connection of the
power supply wire. Check if
the voltage is correct
Check if the controller has
been correctly connected with
the heating element (casing
of the controller should
completely cover the head of
the heating element)
Disconnect the device com-
pletely from electricity and
wait until it cools down, then
turn it back on again