TERMA SKT 1 Gebrauchsanweisung Seite 93

SKT 4 controller installed on the SPLIT heating element is the ba-
sic configuration of this type of heating element unit which allows
use of all the basic features of the device (see: Local mode operation).
Local mode operation (without IR transmitter)
Heating mode
In local mode, it is possible to set one of 10 settings values:
Use the key / to set the required level. It is possible to set 1 of
10 heating levels: 0 - 100% of the nominal heating output or a range
of 20 ... 28° C when measuring the room temperature. The
indicates the current heating status. The set value equal to 0 means
that the device will not heat.
Dryer mode (timer)
button is used to turn the mode on and set the time after which
the device is to be turned off automatically. In order to activate
the Dryer Mode:
• press button shortly — display panel will show dryer working
time of 1H (1 hour),
EN
SKT 4 controller can also cooperate with an external wall-mounted
transmitter (ie. DTIR or TTIR type), which adds additional features to
the basic set (see: Remote mode operation).
• every subsequent pressing of the
working time (2-4 hours).
In order to deactivate the Dryer Mode, set the time to 0H (press the
button a few times) or turn the device off and back on.
While the Dryer Mode is active the number of hours remaining to
icon
the end of the program is displayed (a digit and the letter H). During
that time:
— to see the set temperature press once any of the
— to change the temperature setting press the
a few times,
— press the button to modify the time after which the Dryer
mode will be terminated.
Actual working time meter
The unique feature measuring the actual working time of the heat-
User Manual — Electric heating elements of the SKT series
button will prolong dryer
/ buttons,
or button
93