Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation or removal
Detailed information demonstrating the different ways of install-
ing or removing a radiator heating element is available from the
manufacturer or importer (see footnotes at the end of the manual).
Below we list some basic requirements and principles which must
be followed to ensure long term, reliable operation of the product.
8% (20°C)
EN
Before installation or first use:
1.
Read the chapter Safety requirements —Installation.
2.
Fit the heating element using the correct spanner (size
3.
The heating element must be installed at the bottom of the
radiator, perpendicular to the radiator pipes, while preserving
space for the proper circulation of the heating medium.
4.
Use a suitable heating medium for filling the electric radiator,
i.e. (water, special products based on water and glycol for use
in central heating systems, or oil which complies with the re-
quirements of the manufacturer of the radiator and heating
element).
5.
Do not switch the heating element on if it is not fully immersed
in radiator heating medium (applies also to the first use)!
6.
Make sure an adequate air cushion is present to protect against
excessive pressure build up within the electric only radiator (or
leave one of the radiator valves open in central heating system).
User Manual — Electric heating elements of the SKT series
24).
79
Werbung
