Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SKT 2
Heating element unit heats the radiator that it is installed in and
precisely controls room temperature at the same time. The device has
5-step temperature regulation (buttons:
ature range from 30-60 degrees Celsius.
the device on and off and to deactivate the TIMER Mode (if active).
Construction of the device (PTC heating element) protects against
burning by restricting the temperature of the radiator to 60°C, re-
gardless of its current setting, (provided that the heat output of the
heating element has been properly matched with the heat output
of the radiator).
User Manual — Electric heating elements of the SKT series
84
TIMER Mode
changing parameters
On/Off
Construction of the device as well as physical characteristics of
the heating agent inside the radiator influence the way in which
and
) within temper-
the heat is distributed — the temperature of the bottom pipes
button is used to turn
of the radiator (especially the two located at the very bottom of
the radiator) may be lower than the temperature of the remaining
parts of the radia tor — this is a normal phenomenon.
Turning the device on does not mean that it uses the same maxi-
mum power for the whole time it is on. On turning the device on, it
operates with the nominal power for a short period of time in order
to heat up the radiator to the set temperature. After that, it turns
itself on and off periodically, using only as much energy as it is
required to maintain the set temperature of the radiator for cur-
rent external conditions.
Werbung
