Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.
Follow the subsequent guidelines when connecting the electri-
cal installation:
a.
Brown wire — live connection to the circuit (L).
b.
Blue wire — connect to neutral (N)
c.
Black wire - Fil-Pilote control (FP).
WARNING: If the FIL-PILOTE interface is not used, the FP wire
(black) must be secured from access to the other wires. DO
NOT CONNECT the "FP" wire to GROUND TERMINAL.
8.
Before filling the radiator with heating medium, ensure that the
heating element is fitted properly and that it is water tight.
9.
In central heating installation radiator must be fitted with the
valves enabling disconnection of the radiator from the rest of
the system.
10. For detailed installation hints — see the last pages of this manual.
User Manual — Electric heating elements of the SKT series
80
Notes prior to removal:
1.
Disconnect the device from electric circuit and ensure that the
radiator has cooled down before you start disassembling the
radiator.
2.
Release the screw at the back of the controller casing.
3.
Take off the controller from the heating element.
4a. In case of dual-fuel radiator, close the valves and empty the
radiator.
4b. Be careful — electric only radiator filled with heating liquid may
be very heavy. Ensure all necessary safety measures.
5.
For disassembling the heating rod use a spanner no 24.
Product disposal
This product should not be disposed of as general waste but should
be brought to the appropriate collection point for recycling of electric
and electronic devices. This information is provided by the sign on the
product, user manual and packaging. Information on the appropriate
point for used devices can be provided by your local authority, product
distributor or the store from where the product was purchased. Thank
you for your effort towards protecting the environment.
Werbung
