Silvercrest SMUD 860 A1 Bedienungsanleitung Seite 238

CAUTION! MATERIAL DAMAGE!
► Do not use abrasive or aggressive cleaning materials. These can damage
the surface of the appliance!
■ Clean the base
For stubborn dirt, add a little mild detergent to the cloth.
Ensure that the base
■ Remove the condensation collector
■ Remove the cutlery bracket
upward direction.
■ Clean the cutlery bracket
the steamer
Rinse all the parts off using clean water.
After rinsing, dry all pieces thoroughly with a drying cloth.
Ensure that all parts are dry before reusing.
■ To clean the inside of the appliance lid
the sealing ring:
–
Open the appliance lid
–
Push both locking mechanisms (1) on the bottom edge of the silver
panel outwards simultaneously. At the same time, pull the silver panel
down towards the front so that the upper brackets (2) can be pulled
out of the indentations in the appliance lid
■ 234 │
GB
with a moist cloth.
is completely dry before operating it again.
by pulling it out of the mount on the base
, the inner bowl
in warm water. Add a little mild detergent.
as far it goes.
2
1
.
, the spoon
, you can detach the silver panel with
:
2
1
in an
, the ladle and
SMUD 860 A1