General - Silvercrest SMUD 860 A1 Bedienungsanleitung

General

1) Press the stop button
are shown on the display; the "start" indicator lamp flashes.
2) To select a programme, press the menu button
desired programme flashes.
If this programme allows you to set a temperature, the temperature indication on
the bottom left of the display will show the set value.
3) If you want to change the preset cooking time, press the h/+
4) Press the start button
"Steam" programmes, the set time starts counting down in 1-minute steps once the
device has reached the desired temperature. In all other programmes, the set time
counts down immediately after you press the start button
NOTE
During the cooking process, the symbol
duration of the programme, and the symbol of the currently active programme
are displayed.
The indicator lamp "Start", which is integrated into the "Start" button
The indicator lamp "Keep Warm", which is integrated into the "Stop"
button
It indicates that the keep-warm function is activated (indicator lamp on) and
will start automatically after the programme finishes.
You can deactivate the keep-warm function at any time during the cooking
process by pressing the start button
5) To interrupt a programme or the keep-warm function, press the stop button
■ 214 │
GB
. The appliance is in standby mode: All symbols
buttons until the desired time is shown on the display.
to start the programme. In the "Sear", "Pasta", and
, is lit.
until the symbol of the
.
and the symbol , the remaining
.
SMUD 860 A1
or min/-
, is lit.
.