Safety Instructions For Drills - Scheppach TBD55 Originalbetriebsanleitung

d) Keep unused electric tools out of the reach of children. Do not
let people use the electric tool who are not familiar with it or who have
not read these instructions. Electric tools are dangerous if they are
used by inexperienced people.
e) Maintain electric tools and tool attachments with care. Check
whether moving parts function properly and do not get stuck and
whether parts are broken or are damaged and thus adversely affect
the electric tool function. Have damaged parts repaired before using
the electric tool. Many accidents are caused by poorly maintained
electric tools.
f) Always keep cutting tools sharp and clean. Carefully maintained
cutting tools with sharp cutting edges seize up less often and
are easier to guide.
g) Use electric tools, accessories, insertion tool, etc. according to
these instructions. Take the working conditions and the activity to
be carried out into consideration. Using electric tools for applications
other than the intended uses can lead to dangerous situations.
h) Keep the handles and gripping surfaces dry, clean and free of
oil and grease. Slippery handles and gripping surfaces prevent safe
operation and control of the electrical tool in unforeseen situations.
Service
a) Only have your electric tool repaired by qualified specialists
and only with original spare parts. This ensures that safety of the
electric tool is maintained.

Safety instructions for drills

a) The drill must be secured. An incorrectly secured drill can move or
topple and this can result in injuries.
b) The workpiece must be clamped or fastened to the workpiece
support. Do not drill into workpieces that are too small to be se-
curely clamped. Holding the workpiece by hand can lead to injuries.
www.scheppach.com
GB | 45